Vacuum Emulsifying Mixer

250L vacuum emulsifying mixer

Capacity

Design volume: 250L, working real capacity:200 L

Kettle Cover

Liquid(particle)inlet, sunk material inlet, air inlet with filter, inspect light and sight glass, 2 PCS CIP drencher head, vacuum port, pressure meter(1 to -0.1 bar), pressure clamp, hole for adding powder product ( 150mm diam ) , hydraulic lift of cover ( rise/lower )

Mixing Pot

Material

Inner layer: SUS316L        thickness: 5mm

Middle layer: SUS304        thickness: 4mm

Outside layer: SUS304       thickness:3mm

configuration

Bottom material exhaust, size: 1.5”

Temp. sensor (0-199℃)

Electrical heating: 12kw, cooling water inlet

Stirring System

Homogenizer

1．Material: SUS316L; standard homogenizer

2. Power: 7.5 kw/380/50Hz; RPM: 2800R/Min

Stirring scrap and middle stirring

Material: SUS316L，Scrap material: PTFE

1. Stirring scrap and middle stirring use the same motor

2、Power：2.2kw/380V/50Hz；RPM：0~65r/min（Frequency control）

3.  Stirring scrap and middle stirring rotating the opposite direction  

Safety: 1. During stirring, the cover can not open;

2. Cover lift can not stirring.

Vacuum System

1. Vacuum pump: water recycle, power 2.2kw/380V/50Hz

2. With pressure sensor (during vacuum condition, hydraulic can not open)

Heating Method

Jacket electrical heating

Exhaust Method

Hydraulic doom and bottom exhaust or positive pressure exhaust material

Pressure

Pressure in the pot during working: -0.090 Mpa; Jacket working pressure:0.2 Mpa

Control Box

SUS304 , 1.2mm thickness